Lightpro Garden Lighting Power Pack Small – 100W Transformer, 25 m Cable & Connectors

Sized for a patio, a single border or a short path: a 100 W transformer and 25 m of cable on one run. Add it to the Lightpro lights you choose and you have a complete, warranty-qualifying 12V system that plugs into a standard outdoor socket – no electrician, no burying cable.

Every Lightpro light comes with its own Connector F, and the transformer includes a Connector M, a dark-light sensor and a 10-setting timer (1 to 10 hours, or dusk to dawn).

What’s in the pack

Load: up to 100 W of lights. Cable: 25 m. Runs: One run of up to 25 m.

How many lights will it run?

Roughly, for one type of light at typical spacing with a 5 m lead from the socket (each light’s page shows its own figure):

Is this the right size?

1. Measure the cable route from your outdoor socket, past every light, to the last one. Up to 25 m: Small. Up to 50 m: Medium. Longer, or two separate areas: Large.
2. Add up the watts (on each light’s page). Up to 100 W: Small or Medium. 100–150 W: Large. Over 150 W: two packs.
3. Pick the bigger of the two answers. For most gardens the cable length decides it.

Need a different size? Medium Power Pack (100 W, 50 m, £387.20). Large Power Pack (150 W, 100 m, £596.80).

Before you install

• Maximum cable run is 80 metres from the transformer to the end of any one run. Beyond that, volt drop will dim or stop the lights and the warranty no longer applies.
• Do not exceed 100 W of connected lights. Lightpro transformers are de-rated for LED, so the full 100 W is usable.
• Smart (Zigbee) lights also need the Gateway Smart (219A), sold separately. A Camera Smart adds 7 W and a Switch Smart 1 W to the load.
• Cable does not need burying; the system is low voltage and safe around people and pets.